DTC C0061-54: C0062-54: C0063-54: DSC HU/Control Module System (Unperformed Initialization Procedure): Notes

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

DTC	C0061:54, C0062:54, C0063:54		DSC HU/Control Module system (unperformed initialization procedure)
DETECTION CONDITION		C0061:54 DSC HU/Control Module detects that the initialization procedure has not been performed. (Lateral acceleration sensor) C0062:54 DSC HU/Control Module detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor) C0063:54 DSC HU/Control Module detects that the initialization procedure has not been performed. (Yaw rate sensor)
FAIL-SAFE FUNCTION		Refer to "DTC TABLE " and "Fail-safe Function Malfunction Contents". (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed SAS control module malfunction DSC HU/Control Module malfunction
SYSTEM WIRING DIAGRAM		-