Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> CX-5 Grand Select, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (1 Of 5) >> DTC P0133-00: A/F Sensor Circuit Slow Response >> Repeatability Verification Procedure

Repeatability Verification Procedure

  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
  2. Start the engine and leave it idling for 1 min.
  3. Shift to 3rd gear and drive the vehicle for 10 min at an engine speed of 1, 500 rpm or more and a vehicle speed of 50 km/h {31 mph} or more.
    NOTE:
    • Match the engine coolant temperature in the recorded FREEZE FRAME DATA/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  4. Try to reproduce the malfunction by driving the vehicle for5 min based on the values in the FREEZE FRAME DATA/snapshot data.
scientia non olet · About Mike's Workshop Manuals