Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> CX-5 Grand Select, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Push Button Start Inspection >> LED Illumination Inspection

LED Illumination Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the lower decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
  3. Remove the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
  4. Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.
Fig 1: Applying Battery Positive Voltage To Push Button Start
G11273557Courtesy of MAZDA MOTORS CORP.
Fig 2: Push Button Start Terminal Chart
G11273558Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals