DTC U2300-56; Configuration Data Unmatched With Instrument Cluster: Notes
DTC U2300-56; CONFIGURATION DATA UNMATCHED WITH INSTRUMENT CLUSTER - DETECTION CONDITION & POSSIBLE CAUSE
| Description |
Configuration data unmatched with instrument cluster |
| Detection condition |
- Configuration data of the blind spot monitoring (BSM) control module and instrument cluster are not matched with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Blind spot monitoring (BSM) system is stopped.
|
| Possible cause |
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not implemented
- Instrument cluster internal memory malfunction
- Instrument cluster configuration data error
- Blind spot monitoring (BSM) control module (LH) malfunction
|
| System wiring diagram |
Not applicable |