DTC U0415-68; Error Signal Received From DSC HU/CM: Notes

DTC U0415-68; ERROR SIGNAL RECEIVED FROM DSC HU/CM - DETECTION CONDITION & POSSIBLE CAUSE

Description	Error signal received from DSC HU/CM
Detection condition	Blind spot monitoring (BSM) control module (LH) receives the error signal from the DSC HU/CM for 2 s or more with the ignition switched ON (engine off or on).
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	DTCs are stored in the DSC HU/CM. DSC HU/CM malfunction DTCs are stored in the instrument cluster. Instrument cluster malfunction Blind spot monitoring (BSM) control module (LH) malfunction
System wiring diagram	Not applicable