Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> 6 Touring, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Dynamic Stability Control System) >> Front Abs Wheel-Speed Sensor Inspection >> Clearance Inspection >> Servicing after inspection

Servicing after inspection

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ABS wheel-speed sensor from the wheel hub, steering knuckle component.
  2. Install the wheel hub, steering knuckle component. (See WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION .)
  3. Install the ABS wheel-speed sensor. (See FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION .)
  4. Inspect the front wheel alignment. (See FRONT WHEEL ALIGNMENT .)
scientia non olet · About Mike's Workshop Manuals