Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> 5 GT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) >> Transaxle Range (Tr) Switch Inspection >> On-Vehicle Inspection

On-Vehicle Inspection

  1. Apply the parking brake firmly, and set the wheel blocks for both the front and rear wheels.
  2. Disconnect the TR switch connector.
    1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
    2. Disconnect the negative battery cable.
    3. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.5] .)
    4. Disconnect the TR switch connector.
      G13727508Courtesy of MAZDA MOTORS CORP.
  3. Measure the resistance and continuity between the TR switch terminals.
    G13727509Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals