Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System - Auto A/C >> Front Blower Motor Installation (Auto A/C) >> Front blower Case Installation Note

Front blower Case Installation Note

  1. If not replacing the front blower case, replace the adhesive polyurethane on the fresh-air inlet of the front blower case.
    G13728909Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • To adhere new polyurethane properly, be sure to remove the adhesive agent and adhesive polyurethane completely.
    NOTE:
    • If the front blower case is removed or installed, the adhesive polyurethane can be damaged. Damaged adhesive polyurethane could cause abnormal noise or other malfunctions, therefore replace it.
scientia non olet · About Mike's Workshop Manuals