Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control >> On-Board Diagnosis >> Reading DTCs Procedure >> ODDTC self test

ODDTC self test

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "ABS".
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the DSC. (See CLEARING DTCS PROCEDURE .)
scientia non olet · About Mike's Workshop Manuals