Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2017 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics - Dynamic Stability Control >> DTC C0061-54/C0063-54: DSC HU/Cm System (Unperformed Initialization Procedure) (DSC) >> Notes

DTC C0061-54/C0063-54: DSC HU/Cm System (Unperformed Initialization Procedure) (DSC): Notes

DTC C0061:54/C0063:54 (DYNAMIC STABILITY CONTROL) DETECTION CONDITION AND POSSIBLE CAUSE

DTC C0061:54, C0063:54 DSC HU/CM system (unperformed initialization procedure)
DETECTION CONDITION
  • C0061:54
    • DSC HU/CM detects that the initialization procedure has not been performed. (low-G sensor)
  • C0063:54
    • DSC HU/CM detects that the initialization procedure has not been performed. (yaw rate sensor)
FAIL-SAFE FUNCTION
  • Illuminates the TCS/DSC indicator light.
  • Inhibits the TCS (engine control) and DSC controls.
POSSIBLE CAUSE
  • Initialization procedure for the low-G sensor or yaw rate sensor not performed
  • SAS control module malfunction
  • DSC HU/CM malfunction
SYSTEM WIRING DIAGRAM -
scientia non olet · About Mike's Workshop Manuals