Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> MX-5 Miata Club, Standard Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System - Auto A/C >> Ambient Temperature Sensor Removal/Installation

Ambient Temperature Sensor Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the front under cover. (See FRONT UNDER COVER REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Identifying Ambient Temperature Sensor Connector
    G10953268Courtesy of MAZDA MOTORS CORP.
  4. While pressing the clip tabs of the ambient temperature sensor in the direction of arrows (1) shown in the figure, press the clip in the direction of arrow (2) to detach the clip tabs from the air seal cowl up.
    Fig 2: Pressing Ambient Temperature Sensor Clip Tabs
    G10953269Courtesy of MAZDA MOTORS CORP.
  5. Remove the ambient temperature sensor.
  6. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals