Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> MX-5 Miata Club, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle Shift Mechanism) >> Automatic Transmission Shift Mechanism Removal/Installation >> Control Rod Removal/Installation >> TWC Installation Note

TWC Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the tunnel member temporarily.
    Fig 1: Removing Tunnel Member
    G10952986Courtesy of MAZDA MOTORS CORP.
  2. Install the TWC to the exhaust manifold (WU-TWC). (See EXHAUST SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
scientia non olet · About Mike's Workshop Manuals