| Detection condition |
- Radar sensor sensitivity in blind spot monitoring (BSM) control module (LH) decreases for 5 s or more
with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Blind spot monitoring (BSM) system is stopped.
|
| Possible cause |
- Rear bumper dirt or foreign material (reflective object) is adhered.
- Dirt or foreign material (reflective object) on blind spot monitoring (BSM) control module (LH)
- Concavity and convexity on the surface of the repaired rear bumper
- Blind spot monitoring (BSM) control module (LH) malfunction
|
| System wiring diagram |
Not applicable |