DSC Operates Frequently/DSC Does Not Work Correctly: Notes

DSC⁽¹⁾ operates frequently
DSC does not work correctly

POSSIBLE CAUSE

DSC HU/CM detected malfunction. (Input and output device malfunction)
Poor installation with SAS control module (yaw rate sensor, low-G sensor) (If SAS control module is poorly installed, DSC may operate intermittently.)
There is a difference in condition or air pressure between front or rear tires.
When replacing DSC HU/CM and SAS control module, initialization is not performed. (If initialization is not performed correctly, DSC may not work correctly.)

⁽¹⁾	TCS/DSC indicator light turns on and off while DSC operates