| DETECTION CONDITION |
- Pump motor, traction control solenoid valve and stability control solenoid valve is forcibly operated for 30 s or more is detected.
- Inlet solenoid valve is forcibly operated for 120 s or more and outlet solenoid valve is forcibly operated for 30 s or more is detected.
|
| FAIL-SAFE FUNCTION |
- Refer to "Fail-safe function table". (See DTC TABLE .)
|
| POSSIBLE CAUSE |
- Overheating protection control is performed to protect solenoid valve inside DSC HU/CM, however, this is not a malfunction
|
| SYSTEM WIRING DIAGRAM |
- |