| Description |
Error signal received from SAS control module |
| Detection condition |
- The rear body control module (RBCM) detected the following conditions for 3 s or more
with the ignition switched ON (engine off or on).
- A signal is received which cannot normally determine the collision conditions from SAS control module even though the collision detection unlock function presence signal received from the rear body control module (RBCM) determines that the function is present.
|
| Fail-safe |
Not applicable |
| Possible cause |
- DTCs are stored in the SAS control module.
- SAS control module malfunction
|
| System wiring diagram |
Not applicable |