Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (On-Board Diagnostics - AWD System) >> Electronic AWD Control System On-Board Diagnosis [Electronic AWD Control System] >> Reading DTCs Procedure >> DTC self test

DTC self test

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "All DTCs".
      NOTE:
      • Snapshot data appears at the top of the help screen when the displayed DTC is selected.
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection after recording the snapshot data.
  4. After completion of repairs, clear all DTCs stored in the AWD control module. (See CLEARING DTCS PROCEDURE .)
scientia non olet · About Mike's Workshop Manuals