Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (On-Board Diagnostics - AWD System) >> Electronic AWD Control System On-Board Diagnosis [Electronic AWD Control System] >> Clearing DTCs Procedure >> DTC self test

DTC self test

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Self Test".
    2. Select "All DTCs".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition OFF.
  6. Switch the ignition to ON (engine off) and wait for 5 s or more  .
  7. Perform DTC inspection. (See READING DTCS PROCEDURE .)
  8. Verify that no DTCs are displayed.
scientia non olet · About Mike's Workshop Manuals