Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (On-Board Diagnostics - AWD System) >> Electronic AWD Control System On-Board Diagnosis [Electronic AWD Control System] >> Clearing DTCs Procedure >> Active Command Modes Procedure

Active Command Modes Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS (IDS) to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the IDS.
    1. Select "Data Logger".
    2. Select "Modules".
    3. Select "4X4".
  3. Select the simulation items from the PID table.
  4. Perform the active command modes function, inspect the operations for each parts.
    • If the operation of output parts cannot be verified after the active command mode inspection is performed, this could indicate the possibility of an open or short circuit, sticking, or operation malfunction in the output parts.
scientia non olet · About Mike's Workshop Manuals