DTC B00A0-28: Occupant Classification Sensor Calibration Setting Invalid: Notes

System malfunction location	Occupant classification sensor calibration setting invalid
Detection condition	WARNING: Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. Calibration set value not within valid range.
Fail-safe	-
Possible cause	Occupant classification sensor deformed or malfunction Object placed on front passenger-side seat during calibration of occupant classification sensor Improperly installed front passenger-side seat part at time of calibration Deformed floor where attached to front passenger-side seat Seat warmer is dry malfunction Seat cushion is damp Occupant classification sensor malfunction SAS control module malfunction
System wiring diagram	-