Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> On-Board Diagnostic - Two-Step Deployment Control System >> Clearing DTC [Two-Step Deployment Control System] >> DTC Self Test

DTC Self Test

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the MMDS.
    1. Select "Module programming".
    2. Select "All DTCs".
  3. Verify the DTC according to the directions on the screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Switch the ignition to off.
  6. Switch the ignition to ON (engine off or on) and wait for 5 s or more.
  7. Perform DTC inspection. (See DTC INSPECTION [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .)
  8. Verify that no DTCs are displayed.
scientia non olet · About Mike's Workshop Manuals