| DETECTION CONDITION |
- C0061:54
- DSC HU/Control Module detects that the initialization procedure has not been performed. (Lateral acceleration sensor)
- C0062:54
- DSC HU/Control Module detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor)
- C0063:54
- DSC HU/Control Module detects that the initialization procedure has not been performed. (Yaw rate sensor)
|
| FAIL-SAFE FUNCTION |
Refer to "DTC TABLE " and "Fail-safe Function Malfunction Contents". (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)] .) |
| POSSIBLE CAUSE |
- Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed
- SAS control module malfunction
- DSC HU/Control Module malfunction
|
| SYSTEM WIRING DIAGRAM |
- |