Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (On-Board Diagnostic - Dynamic Stability Control System) >> DTC C1031 35: Tire Pressure Monitoring System (TPMS) Set Switch >> Notes

DTC C1031 35: Tire Pressure Monitoring System (TPMS) Set Switch: Notes

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC C1031 35 DETECTION CONDITIONS AND POSSIBLE CAUSES (DYNAMIC STABILITY CONTROL)

DTC  C1031:35  Tire pressure monitoring system (TPMS) set switch 
DETECTION CONDITION 
  • Continuous ON signal from the TPMS set switch for 60 s or more  is detected.
FAIL-SAFE FUNCTION 
  • Tire pressure monitoring system warning light illuminates after flashes.
  • Inhibits the TPMS control.
POSSIBLE CAUSE 
  • The driver pressed and held the TPMS set switch for 60 s or more. 
  • TPMS set switch malfunction
SYSTEM WIRING DIAGRAM  Not applicable
scientia non olet · About Mike's Workshop Manuals