Lane Departure Warning System (LDWS)
WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition ON (engine off or on).
- Select [Settings] on the center display.
- Select [Safety] on the center display.
- Select [Lane Departure Warning System] on the center display.
- Select an item name, and then select option.
| Display of center display |
Function |
Initial setting |
Settings |
Control module |
| Timing |
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed. |
Before Line |
At Line/Before Line |
FSC |
| Warning |
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed. |
Low |
High/Low |
FSC |
| Sound |
The type of the LDWS warning alarm can be changed. |
Beep |
Beep/Rumble |
Instrument cluster |
| Beep Volume |
The volume of the LDWS warning alarm (Beep) can be changed. |
High or Low |
High/Low |
Instrument cluster |
| Rumble Strip Volume |
The volume of the LDWS warning alarm (Rumble) can be changed. |
High or Low |
High/Mid/Low |
Instrument cluster |
| Reset |
Returns the setting content of the lane departure warning system to the initial setting. |
No |
No/Yes |
|