DTC U2300-55: Instrument Cluster Configuration Not Implemented: Notes

System malfunction location	Instrument cluster configuration not implemented
Detection condition	The AFS control module received a signal which indicates the instrument cluster configuration is not performed.
Fail-safe	The swivel actuator is moved to the center. The headlight leveling actuator is stopped at the position when the malfunction is determined.
Possible cause	NOTE: To correctly write the configuration data sent from the instrument cluster to the AFS control module, 30 s or more have to be elapsed since the ignition is switched ON (engine off or on). Instrument cluster configuration is not completed. AFS control module malfunction
System wiring diagram	-