DTC U3000-54: Radar Aiming Is Not Performed Or Radar Sensor Axis Is Deviated (Blind Spot Monitoring (BSM) Control Module (LH): Notes

Description	Radar aiming is not performed or radar sensor axis is deviated (Blind spot monitoring (BSM) control module (LH)
Detection condition	Malfunction in radar aiming of blind spot monitoring (BSM) control module (LH) detected for 1 s or more with the ignition switched ON (engine off or on).
Fail-safe	Blind spot monitoring (BSM) system is stopped.
Possible cause	Blind spot monitoring (BSM) radar aiming (LH) was not performed. Deviation of blind spot monitoring (BSM) control module (LH) radar sensor axis Blind spot monitoring (BSM) control module (LH) malfunction
System wiring diagram	Not applicable