Possible Cause
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Keyless beeper malfunction
- Short to power supply in wiring harness between the following terminals:
- Keyless beeper terminal A and LF control unit terminal L
- Keyless beeper terminal B and LF control unit terminal N
- Short to ground in wiring harness between the following terminals:
- Keyless beeper terminal A and LF control unit terminal L
- Keyless beeper terminal B and LF control unit terminal N
- Open circuit in wiring harness between the following terminals:
- Keyless beeper terminal A and LF control unit terminal L
- Keyless beeper terminal B and LF control unit terminal N
- Start stop unit terminal 1AF and ground
- Start stop unit terminal 2B and ground
- Personalization feature not set