Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> 3 Sport, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle Shift Mechanism) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Cable Outer End (Transaxle Side) Installation Note

Cable Outer End (Transaxle Side) Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Assemble the cable outer end (transaxle side) to the bracket so that the marking is in the area of the arrow shown in the figure.
    Fig 1: Assembling Cable Outer End (Transaxle Side) To Bracket Marking In Area
    G10961217Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals