Repeatability Verification Procedure
- Switch the ignition ON and leave for 5 s or more .
- Clear the DTC from the PCM memory using the M-MDS. (Refer to CLEARING DTC [SKYACTIV-G 2.0, SKYACTIV-G 2.5]
.)
- After switching the ignition off, switch the ignition back ON and leave for 5 s or more .
- Using the M-MDS, display DTCs and verify that DTC U0151:00 is not displayed. (Refer to ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)