Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2016 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Indicator Unit Inspection >> LED Illumination Inspection >> When using M-MDS

When using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    • "Data logger"
    • "Module"
    • "IC"
  3. Using "LCD_SEG", verify that the following warning/indicator lights are turned on.
    Fig 1: Screen Display - Warning/Indicator Lights
    G10963897Courtesy of MAZDA MOTORS CORP.
    • If any one of the warning/indicator lights is not displayed, replace the indicator unit.
scientia non olet · About Mike's Workshop Manuals