Starter Interlock Switch Inspection
WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
- Disconnect the starter interlock switch connector.
- Verify that the continuity is as indicated in the table using a tester.
- If the continuity is not as indicated in the table, replace the starter interlock switch.