Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Security System And Lock System) >> Door Lock Switch Removal/Installation >> Passenger's Side

Passenger's Side

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the power window subswitch cover. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION ).
  3. While pulling the power window subswitch cover in the direction of arrow (1) shown in the figure, pull the door lock switch in the direction of arrow (2) shown in the figure, and detach the door lock switch tabs from the power window subswitch cover.
    Fig 1: Removing Power Window Subswitch Cover
    G09076991
  4. Detach all of the door lock switch tabs from the power window switch cover and remove the door lock switch.
  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals