Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Dynamic Stability Control System) >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note

DSC HU/CM Connector Removal Note

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the lock lever down in the direction of the arrow while pressing the tab of the connector cover.
  2. Pull the connector toward the vehicle rear and remove it.
    Fig 1: Removing DSC HU/CM Connector
    G09075243
scientia non olet · About Mike's Workshop Manuals