Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2015 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control - Introduction, After Repair Procedure, DTC Table >> KOEO/KOER Self Test >> KOEO Self Test

KOEO Self Test

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "Self Test".
    2. Select "Modules".
    3. Select "PCM".
  3. Then, select the "KOEO On Demand Self Test" and perform procedures according to the directions on the M-MDS screen.
  4. Verify the DTC according to the directions on the M-MDS screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  5. After completion of repairs, clear all DTCs stored in the PCM, while referring to "AFTER REPAIR PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals