Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2015 >> 6 Touring, 2.5L Eng VIN 5, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> On-Board Diagnostic [Vehicle Control Module (V/C Module)] >> DTC C0063 54: MRCC System Initialization Not Implemented >> Notes

DTC C0063 54: MRCC System Initialization Not Implemented: Notes

DTC C0063:54 (VEHICLE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location  MRCC system initialization not implemented 
Detection condition 
  • The initial setting for yaw rate information is not performed after replacing the SAS control module.
    NOTE:
    • If the ignition is switched off (LOCK) when an error occurs during the system initialization command execution, a DTC is detected indicating that the system initialization was not performed.
Fail-safe 
  • Inhibits the Mazda radar cruise control (MRCC) system control
  • Inhibits the forward obstruction warning (FOW) system control
Possible cause 
  • MRCC system initialization not performed after replacing SAS control module
  • SAS control module malfunction
  • Vehicle control module (V/C-module) malfunction
System wiring diagram 
  • Not applicable
scientia non olet · About Mike's Workshop Manuals