DTC C1994 [Dynamic Stability Control (DSC)]: Notes
DTC C1994 DETECTION CONDITION AND POSSIBLE CAUSE
| DTC |
C1994 |
DSC control system |
| DETECTION CONDITION |
- During ABS control, there are two ore more wheels which the wheel speed is 10 km/h {6.2 mph}
or less when pressure reduction or maintain is continuously requested for 0.3 s-3 s
(depending on vehicle driving conditions).
- DSC control is performed continuously for 10 s (5 s
if the vehicle speed is more than 100 km/h {62.1 mph}).
|
| POSSIBLE CAUSE |
- This does not indicate a malfunction since constant control over extended period of time is inhibited to protect the DSC solenoid valve inside the DSC HU.
|