DTC U0100 00/U0101 00/U0151 00/U0155 00/U0214 00: Communication Error: Notes

DTC U0100:00/U0101:00/U0151:00/U0155:00/U0214:00 (POSITION MEMORY SYSTEM) DETECTION CONDITION AND POSSIBLE CAUSES

Description	U0100:00 Communication error with PCM U0101:00 Communication error with TCM U0151:00 Communication error with SAS control module U0155:00 Communication error with instrument cluster U0214:00 Communication error with start stop unit
Detection condition	U0100:00 Position memory control module could not receive the CAN signal from the PCM for 5 s or more . U0101:00 Position memory control module could not receive the CAN signal from the TCM for 5 s or more . U0151:00 Position memory control module could not receive the CAN signal from the SAS control module for 5 s or more . U0155:00 Position memory control module could not receive the CAN signal from the instrument cluster for 5 s or more . U0214:00 Position memory control module could not receive the CAN signal from the start stop unit for 5 s or more .
Fail-safe function	U0100:00 Memory seat positioning using position memory switch and remote transmitter: If the ignition is switched ON (engine off or on), inhibits all memory seat positioning. U0101:00 Memory seat positioning using position memory switch and remote transmitter: If the ignition is switched ON (engine off or on), inhibits all memory seat positioning. U0151:00 Memory seat positioning using position memory switch and remote transmitter: If the ignition is switched ON (engine off or on), inhibits all memory seat positioning. U0155:00 Memory seat positioning using position memory switch and remote transmitter: Inhibits all memory seat positioning. U0214:00 Memory seat positioning using remote transmitter: Inhibits all memory seat positioning. Memory registration using remote transmitter: Inhibits the memory registration.
Possible cause	Malfunction in CAN line between PCM and position memory control module Malfunction in CAN line between TCM and position memory control module Malfunction in CAN line between SAS control module and position memory control module Malfunction in CAN line between instrument cluster and position memory control module Malfunction in CAN line between start stop unit and position memory control module
System wiring diagram	Not applicable