Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 5 Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Symptom Troubleshooting [Abs/Dynamic Stability Control] >> Precaution [Abs/Dynamic Stability Control (DSC)] >> Intermittent Concern Troubleshooting >> Inspection Method For Switches And/Or Sensors

Inspection Method For Switches And/Or Sensors

  1. Connect the M-MDS (IDS) to the DLC-2.
  2. Switch the ignition to ON (engine off).
    NOTE:
    • If engine starts and runs, perform the following steps at idle.
  3. Access PIDs for the switch or sensor you are inspecting.
  4. Vibrate the sensor slightly with your finger.
    • If PID value is unstable or malfunction occurs, check for poor connection and/or poorly mounted sensor.
scientia non olet · About Mike's Workshop Manuals