Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle) >> Input/Turbine Speed Sensor Inspection >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the input/turbine speed sensor connector.
    1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
    2. Disconnect the negative battery cable.
    3. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
    4. Disconnect the input/turbine speed sensor connector.
      Fig 1: Identifying Input/Turbine Speed Sensor
      G08152089Courtesy of MAZDA MOTORS CORP.
  2. Measure resistance between input/turbine speed sensor terminals A and B.
    Fig 2: Identifying Input/Turbine Speed Sensor Connector Terminals
    G08152090Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals