Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 5 Sport, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle) >> Automatic Transaxle Removal/Installation >> Torque Converter Installation Nut Removal Note

Torque Converter Installation Nut Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Fix the crankshaft pulley to lock the torque converter against rotation.
    Fig 1: Fixing Crankshaft Pulley
    G08152142Courtesy of MAZDA MOTORS CORP.
  2. Remove the torque converter installation nut from the starter installation hole.
    Fig 2: Locating Starter Installation Hole
    G08152143Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals