Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle) >> Wheel Hub Component Removal/Installation >> Hub Support Bushing (Front) Installation Note

Hub Support Bushing (Front) Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the projection of a hub support bushing with the marks placed during removal.
    Fig 1: Identifying Hub Support Bushing Projection
    G09785717Courtesy of MAZDA MOTORS CORP.
  2. Install a new hub support bushing (front) using the SSTs  .
    Fig 2: Installing Hub Support Bushing (Front) Using SST
    G09785718Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals