Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Automatic Transaxle Shift Mechanism) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable (Selector Lever Side) Installation Note

Selector Cable (Selector Lever Side) Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the selector lever is in the P position.
  2. Verify that the manual shaft is in the P position.
    Fig 1: Setting Manual Shaft To P Position
    G09786252Courtesy of MAZDA MOTORS CORP.
  3. Press in the lock piece in the direction of the arrow (1) shown in the figure, press in the safety lock in the direction of the arrow (2) shown in the figure, and lock it.
    Fig 2: Pressing Lock Piece
    G09786253Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals