Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Automatic Transaxle Shift Mechanism) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Cable Outer End (Transaxle Side) Installation Note

Cable Outer End (Transaxle Side) Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the cable outer end (transaxle side) to the bracket so that the marking is in the area of the arrow shown in the figure.
    Fig 1: Adjusting Cable Outer End (Transaxle Side)
    G09075607Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals