Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Electric Power Steering System) >> Steering Wheel And Column Removal/Installation >> Bracket Installation Note

Bracket Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the bracket bolt into the steering column and install the projecting part of the bracket to the installation area of the steering column.
    Fig 1: Installing Bracket
    G09786326Courtesy of MAZDA MOTORS CORP.
  2. Verify that the projection on the steering column is inserted into the hole in the bracket as shown in the figure and tighten the nut to the specified torque.
    Fig 2: Steering Column Bracket With Torque Specifications
    G09786327Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals