Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Instrumentation/Driver Info) >> Instrument Cluster Personalization Features Setting Procedure >> Lane Departure Warning System (LDWS) >> Using M-MDS

Using M-MDS

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    1. "Module programming"
    2. "Programmable Parameters"
  3. Select menu in the "IC".
  4. Select an item name, and than select option.
    Mazda Modular Diagnostic System (M-MDS) display Function Initial setting Setting contents Control unit
    LDWS Sound. The type of the LDWS warning alarm can be changed. Rumble or Beep*1 Beep/Rumble Instrument cluster
scientia non olet · About Mike's Workshop Manuals