Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Control System - Full Auto Air Conditioner System) >> Ambient Temperature Sensor Removal/Installation (Auto A/C)

Ambient Temperature Sensor Removal/Installation (Auto A/C)

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
  4. Remove the ambient temperature sensor.
  5. Install in the reverse order of removal.
    Fig 1: Identifying Ambient Temperature Sensor And Connector
    G09786937Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals