DTC C0061 54/C0062 54/C0063 54: DSC HU/Cm System (Unperformed Initialization Procedure): Notes
DTC C0061 54/C0062 54/C0063 54 DETECTION CONDITIONS AND POSSIBLE CAUSES (DYNAMIC STABILITY CONTROL)
| DTC |
C0061:54, C0062:54, C0063:54 |
DSC HU/CM system (unperformed Initialization procedure) |
| DETECTION CONDITION |
- C0061:54
- DSC HU/CM detects that the initialization procedure has not been performed. (Lateral acceleration sensor)
- C0062:54
- DSC HU/CM detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor)
- 00063:54
- DSC HU/CM detects that the initialization procedure has not been performed. (Yaw rate sensor)
|
| FAIL-SAFE FUNCTION |
- C0061:54, C0063:54
- Illuminates the TCS/DSC indicator light, and smart city brake support (SCBS) indicator light (amber)" *1
.
- Tire pressure monitoring system warning light*1
illuminates after flashes. (Not illuminated/flashed depending on malfunction content.)
- Inhibits the TCS, DSC, TPMS*1
, and smart city brake support (SCBS)*1
controls.
- C0062:54
- Illuminates the TCS/DSC indicator light.
- Inhibits the hill launch assist (HLA) control.
*1
: If equipped. |
| POSSIBLE CAUSE |
- Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed
- SAS control module malfunction
- DSC HU/CM malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |