Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Maintenance Monitor Operation Procedure >> Oil Change Setting Procedure >> Using center display

Using center display

  1. Switch the ignition ON (engine off or on).
  2. Select [Applications] on the center display.
  3. Select [Oil Change] on the center display.
  4. Select the following items and change the setting.
Display of center display Function Initial setting Setting contents Control unit
Setting Display (Fixed, Flexible)/non-display of the oil inspection/replacement can be set. Off Off/Fixed/Flexible(1) Connectivity master unit
Distance(2) Distance to display of oil inspection/replacement can be set. 8, 000 km/5, 000 miles 0-99500 km (0-99750 miles) Connectivity master unit
Oil Life(3) Oil life to oil inspection/replacement can be displayed. 100% - Connectivity master unit
Reset Maintenance monitor setting can be reset to the initial value. Back Back/Reset Connectivity master unit
(1) When "Flexible" is selected, the engine oil deterioration condition is calculated based on the frequency of engine starts and the distance travelled. Because the engine oil deterioration condition cannot be calculated correctly if engine oil other than Mazda genuine oil (0W-20) or Castrol oil (0W-20) is used, use Mazda genuine oil (0W-20) or Castrol oil (0W-20) when selecting "Flexible".
(2) If "Fixed" is selected in setting
(3) If "Flexible" is selected in setting
scientia non olet · About Mike's Workshop Manuals