Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> CX-5 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic [Dynamic Stability Control System] >> DTC B10DF-46/C1A08-1C/U2007-46/U2007-62/U3000-49: Control Module Internal Malfunction >> Notes

DTC B10DF-46/C1A08-1C/U2007-46/U2007-62/U3000-49: Control Module Internal Malfunction: Notes

DETECTION CONDITION AND POSSIBLE CAUSE

DTC  B10DF:46, C1A08:1C, U2007:46, U2007:62, U3000:49  DSC HU/CM (internal malfunction) 
DETECTION CONDITION 
  • The DSC CM on-board diagnostic function detects control module internal malfunction.
FAIL-SAFE FUNCTION 
  • B10DF:46, U2007:46
    • Illuminates the TCS/DSC indicator light.
    • Inhibits the TCS, DSC, roll over mitigation (ROM), brake assist control, and hill launch assist (HLA) controls.
  • C1A08:1C
    • Illuminates the TCS/DSC indicator light.
    • Tire pressure monitoring system warning light illuminates after flashes.
    • Inhibits the TCS, DSC, roll over mitigation (ROM), brake assist control, hill launch assist (HLA), and TPMS controls.
  • U2007:62
    • Illuminates the ABS warning light, brake system warning light and TCS/DSC indicator light.
    • Inhibits the ABS, EBD, TCS, DSC, roll over mitigation (ROM), brake assist control, and hill launch assist (HLA) controls.
  • U3000:49
    • Illuminates the ABS warning light*1 , brake system warning light*1 and TCS/DSC indicator light.
    • Tire pressure monitoring system warning light illuminates after flashes. (Not illuminated/flashed depending on malfunction content).
    • Inhibits the ABS*2 , EBD*2 , TCS, DSC, roll over mitigation (ROM), brake assist control*2 , and hill launch assist (HLA), TPMS*2 controls.

*1 : Not illuminated depending on malfunction content.
*2 : Enabled depending on malfunction content.
POSSIBLE CAUSE 
  • DSC HU/CM internal malfunction
SYSTEM WIRING DIAGRAM  -