Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2013 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Electric Power Steering System >> Steering Wheel And Column Removal/Installation >> Start Stop Unit Removal Note

Start Stop Unit Removal Note

  1. Make a groove on the bolt head by punching it with a chisel using a hammer, and remove the bolts by rotating them counterclockwise.
  2. Remove the bolts.
    Fig 1: Making Groove On Bolt Head By Punching With Chisel Using Hammer
    G09075656
  3. Remove the start stop unit from the steering shaft by pulling it in the direction of the arrow shown in the figure.
    Fig 2: Removing Start Stop Unit From Steering Shaft
    G09075657
scientia non olet · About Mike's Workshop Manuals